ESP Enterview 5 Hands Free Colour Door Entry Intercom Kit & Access Keypad

**This item has been discontinued by the Manufacture, ESP. The closest alternative is the Aperta Single Way Colour Door Entry Kit with Keypad – Available Here. Please note: this is not compatible with the Enterview system**

The EV5CKPHF from ESP presents crystal clear colour imagery from your front door to the 7 monitor inside your building, allowing you to see any visitors or potential threats from an out-of-sight location. Bright LEDs provide fantastic illumination, so you can always make out a face, even in darkness.

The device cleverly combines video door entry with access control in a single compact unit.Built in to the vandal resistant camera unit is an illuminated pin code entry pad. The buildings occupiers simply key in their code for entry, visitors request entry by pressing the clearly marked door bell button.

EV5CKPHF provides superb full colour images in all light conditions along with high quality full duplex speechbetween handset and the external camera call point.Images at night are enhanced by automatic activation of 4 high intensity LEDs.The handset unit provides a facility to activate a lock release , transfer calls to other handsetsand select the video feed from the camera call point on demand.

New to EV5 is the ability to connect two external camera call points. Very useful on buildings with front and rear entrances.In addition to an extra camera call point the system can also accept up to three further video handsetsand two audio only handsets at convenient points around the property .

Cabling of Enterview 5 systems is simple, the included power supply feeds suitable voltage to both the monitor and camera. An Additional power supply ( EVBPS ) is only required when introducing a lock release. There is no need for specialist video cable, Cat5 is recommended (4 Core installation). Simply bring cable from the camera/s to a central location and then take a separate cable to each monitor on the system. Power supplies for the monitors can be located close to each monitor or centrally but should be no more than 40m from the monitor position.

Main Features:
Clear high resolution colour picture on 7 hands free monitor
Up to 3 additional monitors per system
Up to 2 additional audio handsets per system
Up to 2 camera call points per system
Door release button
Two camera input
High quality audio
Push to talk button
Volume control
Inputs for two camera call points
Call transfer facility
A visitors call can be transferred to all other handsets on the system
Lock release activation
Lock release can be remotely activated from the handset
View on demand facility
User can select to view the video feed from camera /s
Brightness and contrast controls
Up to 70m cable from monitor to camera ( cat5)
Simple 4 core cable installation
Self contained access control keypad
up to 40 programmable access codes
Powered directly from monitor

Hands Free Monitor Features:
Stylish low profile design
7 hands free low profile colour monitor
High quality audio
Push to talk button
Volume control
Inputs for two camera call points
Call transfer facility
A visitors call can be transferred to all other handsets on the system
Lock release activation
Lock release can be remotely activated from the handset
View on demand facility
User can select to view the video feed from camera /s
Brightness and contrast controls
Up to 70m cable from monitor to camera ( cat5)

Door Access/Camera Features:
Vandal resistant metal housing
Self contained access control keypad
Up to 40 programmable access codes
Latching access code facility
A specific code to leave lock in open position
Integral high white LEDs
Visitors are clearly illuminated even in low light conditions
Weatherproof IP65 rated
3.6mm wide angle 70 degree lens
High quality CCD image chip
Powered directly from monitor

Whats in the kit?
1x Handsfree Monitor Station – LCD Colour Screen
1x Camera & Access Control Door Station – Colour Camera with Electric Door Speaker
1x Power Supply

Technical Specification:

Monitor:
Power:14.5VDC Direct from PSU
Installation:Surface Mounted
Operating Temp:Minus 10 – Plus 55C
Consumption:800mA / 14.5DC
Dimensions Surface:205(W) x 220(H) x 55(D)mm
Net Weight:875g

Camera:
Image sensor:1/3 Colour CCD
Min Illumination:1 LUX
Illumination White:LED 4 pcs
Lens:LG/3.6mm
IRIS system:Electronic automatic
Viewing angle:Horizontal 70 Vertical 50
Voice transmission:Full duplex speech
Power source:DC 15V (+ 1V) from Monitor
Assurance temp:-10C~+50C (14F-122F)
Cabinet:Vandal resistant metal

Access Pad:
Vandal resistant metal housing
Self contained access control keypad
Up to 40 programmable access codes
Latching access code facility
Specific code to leave lock in open position
Weatherproof IP65 rated
High quality CCD image chip
Powered directly form monitor

Comes with a 3 year manufactures warranty

To see our full range of intercoms and intercom accessories,Click Here

To view the manufacturers manual for this product Click Here