Eterna 36W 4000K 600x600mm Dimmable TP(b) LED Panel With Hytronik Driver

White | 36W | 4000K | 3600 lm | 30,000 hrs | Dimmable

This light panel is designed to fit into the space normally occupied by a standard 600mm x 600mm ceiling tile, it is therefore a direct replacement for traditional modular fluorescent fittings used in many offices, educational and commercial applications.

PERFECT FOR OFFICE, COMMERCIAL AND EDUCATIONAL APPLICATIONS

• Aluminium frame
• 100 lm / W
• Low glare and even shadow free light distribution ensures suitability for a variety of applications: visually superior to standard fluorescent panels
• 4000K colour temperature, edge lit: offering a bright neutral white lighting effect
• Ultra slim profile and a white trim finish to match the majority of T. bar ceilings
• Can be recessed in the ceiling or suspended from wires (suspension kit not included, part code SUSPACK)
• SUSPACK cable length: 1m / panelmax. suspension height: 940mm
• Surface mounting can be achieved through the mounting box available separately, part code SURFMK (supplied in kit form)
• Ability to be converted into an emergency luminaire: EBPM3 emergency battery pack required or see SEEBPM3 for self test version
• CRI Ra:80: High CRI to minimise colour distortion of illuminated products
• Supplied with Hytronik branded driver

SWITCH/PUSH DIMMABLE AND 1-10V COMPATIBLE STANDARD LED PANELS

• For switch/push dimming use with a mains voltage push to make / retractive wall switch
• For 1-10V dimming use with a standard 1-10V compatible rotary dimmer. If using a rotary dimmer to turn the panel on/off ensure the dimmer has on/off function
• Max 50m distance from the last driver to the dimming control device
• Up to 20 fittings can be installed on each circuit

PUSH TO MAKE FUNCTIONALITY

• Push and hold the switch to increase the light level to the highest point. Release the switch and then push and hold again to dim through to the lowest point
• Release the switch when the desired lighting level is achieved
• Short press and release turns the light off
• When the light is off, a short press and release turns the light back on again at the same level as when turned off

Technical Specification

Luminaire lumens (with diffuser): 3600 lm
Lumens from chip (no diffuser): 5040 lm
Useful lumens: 3500 lm
Rated Wattage: 36W
Rated luminous flux: 3500 lm
Nominal life time of the lamp: 30,000 hrs
Colour temperature: 4000K
Number of switching cycles before premature lamp failure: 15,000
Warm-up time up to 60 % of the full light output: <1s
Is this product dimmer compatible?: No
Nominal beam angle: 120°
Rated power wattage: 36W
Rated lamp lifetime: 30,000 hrs
Lamp power factor: 0.9
Lumen maintenance factor at end of nominal life: >70%
Starting time: <0.5s
Colour rendering: 78 Ra
Colour consistency: Within a 6 step Macadam ellipse
Rated peak intensity: 1150cd
Rated beam angle: 120°
Voltage / Frequency: 240V~50Hz
Lumens per watt: Up to 100 lm / W
TSI Code: 406600570
Please note: there will be a slight reduction in lumen output if using a dimmer
Not suitable for accent lighting

Technical Specification:

Colour Temperature: 4000K
Colour: White
Wattage: 36W
Lumens: 3600 lm